Unique Nixie Tube Wrist Watch Handmade 3D Printed Case Magnetic Charging
독특한 닉시 튜브 손목시계 핸드메이드 3D 프린팅 케이스 마그네틱 충전
| 상품번호 | 326985943713 |
| 상태 | Pre-owned - Excellent |
| 거래유형 | 즉시구매 |
| 출고국 | 영국 (GB) |
판매 종료된 상품입니다.
구매대행 예상 비용은 로그인 후 확인하실 수 있습니다.
상품 설명
Here we have a unique Nixie tube wristwatch. This watch contains 2 tubes which are normally off to save battery power. To see the time you press the button on the side of the watch, 2 tubes will light up with the hours time, eg 18, they will briefly go off and then immediately flash back on with the minute time, eg 07. So the time is 6.07pm! Tubes were brand new when I soldered them to the board and the watch has only ever been displayed so there should be years and years left in the tubes. You will notice the 2 tubes do slightly differ as I was unable to source identical tubes but they are the same digits and digit size. The casing is 3d printed and has a rubber strap. This watch would not be waterproof so care needs to be taken around water. Battery lasts easily 7 days with average use and can be charged up within a few hours. I include the charge lead which magnetically attaches to the charge port on the watch but you will need a USB plug/port to connect the USB lead to. I will include the stand that I 3d printed for the watch. Any questions welcome. Please check out my listings for similar items.