10pk Alcoa 001501 Hug-A-Lug 1.5" Hex Nut Cover Push-On Ball Seat Stud Pilot
10개입 Alcoa 001501 Hug-A-Lug 1.5인치 육각 너트 커버 푸시온 볼 시트 스터드 파일럿
| 상품번호 | 306946712932 |
| 상태 | New |
| 거래유형 | 즉시구매 |
| 출고국 | 미국 (US) |
이베이 판매가
$64.95
약 95,736원
구매대행 예상 비용은 로그인 후 확인하실 수 있습니다.
상품 설명
PRODUCT OVERVIEW
This is a set of ten (10) genuine Alcoa 001501 Hug-A-Lug chrome
lug nut covers for 1.5-inch hex ball seat (stud-pilot / stud-
located) lug nuts. These push-on (spring-on) nut covers feature
interior metal clips that snap securely over the hex flange of
your lug nut, providing a brilliant chrome finished appearance
that dresses up and protects your wheels. The 001501 is designed
specifically for BALL SEAT (STUD-PILOT) wheels — this is the
older style lug nut mounting system used on dually pickup trucks,
buses, and commercial vehicles with stud-located wheels. If you
are searching for Alcoa 001501, Alcoa 1501, Alcoa Hug-A-Lug 1.5
inch, Alcoa push-on lug nut cover, Alcoa ball seat nut cover,
Alcoa stud pilot nut cover, Alcoa 1 1/16 hex nut cover, Alcoa
dually lug nut cover, Alcoa chrome nut cover dually, H-150 nut
cover, ALU001501, or Alcoa spring-on nut cover 1.5 inch, this is
the correct genuine Alcoa product.
WHY ALCOA 001501 / KEY BENEFITS
GENUINE ALCOA HUG-A-LUG — The Alcoa Hug-A-Lug is the industry
standard for lug nut covers. The 001501 is a genuine Alcoa
product — not a generic aftermarket knockoff. Genuine Alcoa nut
covers feature superior chrome plating that stays highly reflective
and resists dulling, yellowing, and peeling far longer than
imitation covers.
SPRING-ON / PUSH-ON INSTALLATION — The simplest retention system
Alcoa offers. The 001501 uses interior metal clips that grip the
hex flange of your lug nut when pressed into place. No tools are
needed — just push on to install and pull off to remove. The
spring-on design also accommodates variations in lug nut tolerances,
ensuring a secure fit across different nut brands and
manufacturers.
WORKS WITH VIRTUALLY ANY STUD LENGTH — The spring-on design
requires fewer than 2 exposed threads above the nut, meaning it
works with virtually any stud length. Whether your studs are long,
short, or barely protruding, the 001501 will fit. Maximum stud
standout is 1.87 inches.
ABS CHROME PLASTIC — Designed with ABS plastic for durable
strength and higher heat resistance. The advanced chrome plating
ensures a durable and highly reflective finish that holds up to
road conditions, truck washes, and UV exposure.
CORRECT FIT FOR BALL SEAT WHEELS — This is critically important.
The 001501 is specifically designed for BALL SEAT (also called
stud-pilot or stud-located) wheels. These use a conical or
ball-shaped seat at the base of the lug nut. This is the older
mounting system found on many dually pickup trucks, older heavy
duty trucks, buses, and motorhomes. If your truck has the newer
HUB PILOTED wheels with two-piece flange nuts, you need the Alcoa
001821 instead — not this 001501.
BALL SEAT VS HUB PILOTED — WHICH DO I HAVE?
This is the most common source of confusion when ordering Alcoa
nut covers. Here is how to tell:
BALL SEAT / STUD-PILOT WHEELS (001501 << THIS LISTING):
- Each wheel stud goes through a hole in the wheel
- The lug nut has a conical or ball-shaped seat at the base
- The nut itself centers and locates the wheel on the studs
- Common on: 1-ton dually pickups (older models), buses,
motorhomes, older commercial trucks
- Lug nut is a single-piece hex nut (1-1/16" hex)
HUB PILOTED WHEELS (Use 001821 instead):
- The wheel is centered by the hub (pilot pads/ring)
- The lug nut is a two-piece flange nut with a flat washer face
- Common on: newer commercial trucks, some newer 1-ton trucks
- Lug nut has a 1-1/16" hex with a separate rotating flange
If you can see a conical taper at the base of your lug nut where
it contacts the wheel, you have ball seat wheels — use this
001501. If your lug nut has a flat washer-like flange that sits
against the wheel face, you have hub piloted wheels — use the
001821.
SPECIFICATIONS
Part Number: Alcoa 001501
10-Pack Part Number: 001501SP
Bulk Part Number: 001501MP (200-Piece)
Old / Superseded Part Number: H-150
Product Type: Hug-A-Lug Lug Nut Cover
Hex Size: 1.5" (Fits 1-1/16" Hex Lug Nuts)
Cover Height: 1.5"
Maximum Stud Standout: 1.87"
Attachment Style: Spring-On / Push-On (Interior Metal Clip)
Minimum Threads Required: Less than 2
Wheel Application: Ball Seat (Stud-Pilot / Stud-Located) Wheels
Material: ABS Chrome Plastic
Finish: Chrome (Highly Reflective)
Outside Diameter: Approximately 1.06"
Warranty: Standard Manufacturer Warranty
Made in: U.S.A.
Quantity in This Listing: 10 (Ten)
PART NUMBER FAMILY / CROSS REFERENCE
ALCOA 1.5" HUG-A-LUG NUT COVERS:
001501 — 1.5" Hex, Ball Seat Nut, Spring-On, Chrome (Individual)
001501SP — 1.5" Hex, Ball Seat Nut, Spring-On, Chrome (10-Pack)
<< THIS LISTING
001501MP — 1.5" Hex, Ball Seat Nut, Spring-On, Chrome (200-Pack,
Bulk)
001821 — 1.5" Hex, Two-Piece Flange Nut (Hub Piloted), Spring-On,
Chrome (Individual)
001821SP — 1.5" Hex, Two-Piece Flange Nut (Hub Piloted), Spring-On,
Chrome (10-Pack)
001821MP — 1.5" Hex, Two-Piece Flange Nut (Hub Piloted), Spring-On,
Chrome (200-Pack, Bulk)
001551 — 1.5" Hex, Two-Piece Flange Nut (Hub Piloted), Clamp-On,
Chrome (Individual)
001551SP — 1.5" Hex, Two-Piece Flange Nut (Hub Piloted), Clamp-On,
Chrome (10-Pack)
001551MP — 1.5" Hex, Two-Piece Flange Nut (Hub Piloted), Clamp-On,
Chrome (100-Pack, Bulk)
ALCOA TALLER HUG-A-LUG NUT COVERS (For Longer Stud Standouts):
001811MP — 2.1" Hex, Two-Piece Flange Nut, Spring-On, Chrome
(200-Pack)
001813 — 2.1" Hex, Two-Piece Flange Nut, Spring-On, Chrome
(10-Pack)
001861SP — 3.2" Hex, Two-Piece Flange Nut, Spring-On, Chrome
(10-Pack)
001841SP — 3.5" Hex, Two-Piece Flange Nut, Spring-On, Chrome
(200-Pack)
ALCOA MATTE BLACK NUT COVERS (For Dura-Black Wheels):
001871SP — 3.2" Hex, Two-Piece Flange Nut, Screw-On, Matte Black
(10-Pack)
001895SP — 3.2" Hex, Two-Piece Flange Nut, Clamp-On, Matte Black
(10-Pack)
OEM / ALTERNATE PART NUMBERS:
H-150 — Alcoa Old / Superseded Part Number
ALU 001501 / ALU001501 — Freightliner / Volvo OEM Part Number
HOW MANY DO I NEED?
Dually Pickup Trucks (8 Lug per Wheel Position):
- Front axle (2 wheels): 16 nut covers = 2 sets of this 10-pack
(with 4 spares)
- Rear axle (4 wheel positions / 2 inner + 2 outer): 32 nut
covers = 4 sets of this 10-pack (with 8 spares)
- Complete truck (front + rear): 48 nut covers = 5 sets of this
10-pack (exact)
Buses / Motorhomes (Varies by Configuration):
- Count the total number of lug nuts on all wheels and round up
to the nearest 10-pack
APPLICATIONS AND COMPATIBILITY
The Alcoa 001501 fits any vehicle equipped with BALL SEAT (stud-
pilot / stud-located) wheels using 1-1/16" hex lug nuts. This
includes:
DUALLY PICKUP TRUCKS (8x6.5" / 8x165.1mm BOLT PATTERN):
- Fits Chevrolet Silverado 3500 DRW (1999-2010)
- Fits Chevrolet C/K 3500 DRW (1988-2000)
- Fits Chevrolet C/K 30 DRW (1977-1987)
- Fits GMC Sierra 3500 DRW (1999-2010)
- Fits GMC C/K 3500 DRW (1988-2000)
- Fits Dodge Ram 3500 DRW (1994-2010)
- Fits Dodge Ram 350 DRW
- Fits Ford F-350 DRW (1979-1998, 8x6.5" pattern)
NOTE ON FORD: Fits Ford F-250 (1961-1997) and Ford F-350 (1979-
1998) models ONLY with the 8x6.5-inch bolt pattern. Ford switched
to the 8x170mm bolt pattern starting in 1999. If your Ford is 1999
or newer, verify your bolt pattern and lug nut type before ordering.
SINGLE REAR WHEEL (SRW) TRUCKS:
- Fits Chevrolet/GMC 2500/3500 SRW with 8x6.5" pattern
- Fits Dodge Ram 2500/3500 SRW with 8x6.5" pattern
- Fits Ford F-250/F-350 SRW (Pre-1999) with 8x6.5" pattern
BUSES AND MOTORHOMES:
- Fits Prevost buses and coaches (confirmed by customer review)
- Fits MCI (Motor Coach Industries) buses
- Fits various transit and school buses with ball seat wheels
- Fits motorhomes and RVs on commercial chassis with ball seat
wheels
IMPORTANT FITMENT NOTES:
- This cover fits BALL SEAT (stud-pilot) lug nuts ONLY. It does
NOT fit hub piloted two-piece flange nuts.
- 2011+ Chevrolet/GMC 2500HD/3500HD trucks switched to 8x180mm
bolt pattern — verify your bolt pattern before ordering.
- Always check your lug nut style (ball seat vs hub piloted)
before purchasing.
ABOUT ALCOA WHEELS
Alcoa Wheels is a product brand of Howmet Aerospace, a global
leader in engineered metal products headquartered in Pittsburgh,
Pennsylvania. Alcoa invented the forged aluminum truck wheel in
1948 and has been the industry standard ever since. For over 75
years, Alcoa Wheels have been the most trusted name in commercial
vehicle aluminum wheels, and truckers ask for them by name.
Alcoa's product line includes wheels, hub cover systems, axle end
covers, Hug-A-Lug nut covers, valve stems, mounting hardware,
and wheel accessories for trucks, trailers, buses, motorhomes,
and dually pickup trucks. Alcoa Hug-A-Lug nut covers are designed
with ABS plastic for durable strength and higher heat resistance,
and feature advanced chrome plating that ensures a durable and
highly reflective finish.