034 Motorsport Sports Cat Downpipe for Volkswagen Golf MK7 GTI 2.0 TSI FWD MQB
폭스바겐 골프 MK7 GTI 2.0 TSI FWD MQB용 034 모터스포츠 캣 다운파이프
| 상품번호 | 277202790655 |
| 상태 | New |
| 거래유형 | 즉시구매 |
| 출고국 | 영국 (GB) |
이베이 판매가
$1,554.95
약 2,291,996원
구매대행 예상 비용은 로그인 후 확인하실 수 있습니다.
상품 설명
034 Motorsport is proud to unveil the all-new Cast Stainless Steel Racing Downpipe for 8V Audi A3 FWD & MK7 Volkswagen Golf GTI models equipped with EA888 Gen 3 1.8T/2.0T engines! Offering increased horsepower and torque throughout the powerband, reduced turbocharger lag, and an enhanced exhaust note, this is the ultimate downpipe solution for the discerning Audi/Volkswagen enthusiast.
Optimized for increased flow and maximum performance, the MQB 1.8T/2.0T Cast Stainless Steel Racing Downpipe features organic geometry and a massive 101.6mm diameter Euro 3 racing catalytic converter in the factory location. This complete downpipe solution includes an integrated v-band flange at the turbine outlet, integrated oxygen sensor bung after the catalyst, OEM-style corrugated flex bellow, and factory-location exhaust hanger. The MQB 1.8T/2.0T Cast Stainless Steel Racing Downpipe is constructed from 304 stainless steel and TIG-welded for maximum durability and corrosion resistance.
034Motorsport's MQB 1.8T/2.0T Cast Stainless Steel Downpipe was developed entirely in-house on 034Motorsport's Development MkVII Volkswagen GTI utilizing the latest in 3D Scanning Technology, CAD Software, and Rapid Prototyping Techniques. Final production units were then tested extensively on multiple enthusiast-owned 8V Audi A3 & MkVII Volkswagen Golf/GTI vehicles before release.
CAST DOWNPIPE FEATURES
Increased Horsepower & Torque Throughout the Powerband (+ 19-26 HP / + 44-47 TQ)
Quicker Turbocharger Spool & Faster Transient Response (150-300 RPM Quicker Spool)
Enhanced Exhaust Note & Turbocharger Sounds
Direct, Bolt-In Upgrade for FWD Vehicles
Engineered In-House by 034Motorsport's Engineering Team
Factory-Location 101.6mm Euro 3 Racing Catalytic Converter
OEM-Style Corrugated Flex Bellow & Integrated Exhaust Hanger
304 Stainless Steel Construction with Integrated V-Band Flange & O2 Sensor Bung
TIG Welded & Backpurged with Sand-Blasted Titanium-Look Finish
034Motorsport Cast Downpipe for 8V Audi A3/S3 & Mk7 Volkswagen Golf/GTI/R
WHAT'S INCLUDED
034Motorsport Cast Stainless Steel Racing Downpipe
Integrated Euro 3 Racing Catalytic Converter (200 CPI)
304 Stainless Steel MQB FWD Midpipe
76mm to 65mm Transition for Factory Exhaust System
76mm Exhaust Clamps (2)
034MOTORSPORT MQB 1.8T/2.0T DOWNPIPE PERFORMANCE COMPARISONS
These Performance Comparisons were performed using in-house vehicles with 034Motorsport Performance ECU Software (95 Octane).
IS20 STAGE 1 IS20 STAGE 2 (95) DOWNPIPE IS38 STAGE 1 (95) IS38 STAGE 2 (95) DOWNPIPE
Peak Horsepower 294 HP 302 HP 338 HP 358 HP
Peak Torque 334 FT-LBS 341 FT-LBS 366 FT-LBS 382 FT-LBS
Peak HP Gains vs. Stage 1 +19 HP @ 2,200 RPM +26 HP @ 6,400 RPM
Peak TQ Gains vs. Stage 1 +44 FT-LBS @ 2,200 RPM +47 FT-LBS @ 2,600 RPM
SUPPORTED VEHICLES
2013 - 2020 Audi A3/S3 (8V - MQB)
1.8T & 2.0T Gen 3
2013 - 2020 Volkswagen Golf GTI/ R (MkVII - MQB)
1.8T & 2.0T Gen 3
Audi TT MQB FWD
Skoda Octavia RS
Should fit all IS20 or IS38 FWD MQB vehicles from Audi, Volkswagen, Seat and Skoda
Important: This downpipe requires a Stage 2 ECU remap to eliminate any check engine lights due to removal of the factory catalyst.
Please Note: 1.8T models may require a separate 76mm to 60mm reducer (not included) for proper fitment with the factory exhaust system.
The use of de-cats, sports cats are for off road/motorsport use only. Using these parts would inhibit your vehicle from passing a MOT test.
Only EC type-approved components are legal and fit for road use.