JBL DPC-2 Amplifier Module VP7215/95DPC 363679-007 Fully serviced & tested 100%
JBL DPC-2 앰플리파이어 모듈 VP7215/95DPC 363679-007 서비스 완료 및 100% 테스트 완료
| 상품번호 | 186975909337 |
| 상태 | Used |
| 거래유형 | 즉시구매 |
| 출고국 | 미국 (US) |
이베이 판매가
$384.19
약 566,296원
구매대행 예상 비용은 로그인 후 확인하실 수 있습니다.
상품 설명
Genuine JBL Crown DPC-2 Amplifier Module to suit JBL VP7215/95DPC PA speaker.
JBL Part number 363679-007
Unit has been fully serviced including new capacitors in the Power Supply section, and more reliable parts in the switched mode power supply section. Serviced by qualified electronics engineer.
All Three output channels have been load tested for 1 week (2 channels for the LF driver, 1 channel for the HF driver)
All service tests were performed and passed.
Perfect to replace a blown or damaged amplifier module for the JBL VP7215/95DPC Professional PA speaker.
Note that this amplifier has DSP and its settings are for the JBL VP7215/95DPC PA speaker enclosure.
This unit will work worldwide, however, the mains voltage selector switch must be selected to the correct voltage for your Country.
It is currently set to 240v, for countries with mains between 220v and 240v.
If your country uses 100-120v, then the switch must be changed to the 120v position. The selector switch is located above the blue Neutrik Powercon AC input socket.
BE CAREFUL NOT TO SELECT 120v in a country with 220-240v, as this will blow the unit!
Will post worldwide at buyers expense.
JBL Part number 363679-007
Unit has been fully serviced including new capacitors in the Power Supply section, and more reliable parts in the switched mode power supply section. Serviced by qualified electronics engineer.
All Three output channels have been load tested for 1 week (2 channels for the LF driver, 1 channel for the HF driver)
All service tests were performed and passed.
Perfect to replace a blown or damaged amplifier module for the JBL VP7215/95DPC Professional PA speaker.
Note that this amplifier has DSP and its settings are for the JBL VP7215/95DPC PA speaker enclosure.
This unit will work worldwide, however, the mains voltage selector switch must be selected to the correct voltage for your Country.
It is currently set to 240v, for countries with mains between 220v and 240v.
If your country uses 100-120v, then the switch must be changed to the 120v position. The selector switch is located above the blue Neutrik Powercon AC input socket.
BE CAREFUL NOT TO SELECT 120v in a country with 220-240v, as this will blow the unit!
Will post worldwide at buyers expense.