No pickguard Stratocaster Guitar Routing Template Full Set 9mm MR MDF

Routing templates for a no pickguard Stratocaster build with electronics rear-mounted
For custom templates and discounts please contact me via lnstagram
These templates are cut to the exact size so a bearing guided flush cutter will be needed. (Not a guide bush)
These templates set can be used for cutting
Body radius
Neck radius
Electronics cavity and cover
22 Fret Fretboard
Pickup Pockets
Neck pocket
Tremolo Pockets
Location holes
Body contours


CNC precision cut every time from 9mm MR MDF


All templates are CAD drawn according original specifications


all center lines and depths marked for perfect alignment 


Fender Scale length 25.5"  647.7mm (


TIPS FOR FIRST-TIMERS

SETUP

Have your centreline marked up on your stock before you start.
Draw around the perimeter of the template then cut/ trim to about 10mm from your line.

Make sure the template is fixed down very secure. (I use masking tape on both the stock and a template then super glue together).

CUTTING

Clamp down your stock securely to your bench.
Make sure you have the full bearing on the template.
I always do a first cut of about 2-3mm to get a feel of how the stock is responding.
(Most mistakes are made on that first pass)
Don't try to cut too deep on each pass..
Each pass should be no deeper than the thickness of your cutter.
slow down when you get to the end grain.

With experience you will find your own methods