Multifunction RJ45 Network Caber Tester,Full Features UTP Cable Tester Cable Tracer,4" IPS Touch Screen Support TDR,DMM,OPM,POE++ Detect,Level Meter,Ethenet Network Tester,RJ45 TDR,Length,FTP(LT-600T)
다기능 RJ45 네트워크 케이블 테스터, 풀 기능 UTP 케이블 테스터 케이블 추적기, 4" IPS 터치 스크린 지원 TDR, DMM, OPM, POE++ 감지, 레벨 미터, 이더넷 네트워크 테스터, RJ45 TDR, 길이, FTP(LT-600T)
| 상품번호 | B0FP1C99RP |
| 상태 | New |
| 브랜드 | Henkion |
| 판매자 | Henkion US |
| 출고국 | 미국 (US) |
아마존 판매가
$219.99
약 324,265원
구매대행 예상 비용은 로그인 후 확인하실 수 있습니다.
상품 특징
【Upgrade Network Cable Tester&Cable Tracer】Advanced UTP cable test,test UTP cable's sequence,type and remote kit,quickly detect the near-end,mid-end and far-end fault point of RJ45 cable connector.Digital signal ethernet cable tracer can quickly find out the target cable(BNC cable,network cable and telephone cable and other various metal) from the mess cables.Decisively rejects noise and false signals,RJ45 tracer and UTP at the same interface,accurately locate the cables to avoid misjudgment.
【DMM/OPM/VFL】Multifunciton cable tester built-in digital multi-meter, optical power meter and visual fault location. Intelligent digital multimeter, auto-ranging voltage/ resistance/ continuity measurement with isolation protection. Optical power meter--It is used for signal power test and insertion loss test of various equipment and photoelectric components. VFL--the position of optical fiber fault point can be easily and accurately determined.
【POE++ Detect/Network Tools】Rj45 POE Tester supports IEEE802.3BT/AT/AF and non-standard protocol detection. Displays power supply voltage, power supply pins, and pin polarity. Furthermore, network tester built-in 1000M network port, A bunch of network tools, such as IP discovery, IP address scan, PING test, LLDP/CDP detection, Port flashing, PPPOE dial-up.
【TDR & Lever Meter】Only the LT-600T model has both TDR and Level Meter functions. Professional TDR cable break-point and short-circuit testing, the maximum measurement length up to 1200 meters(3937fts). Level Meter-- detect the coaxial camera peak level, sync level, and burst level of video signals.
【RJ45 TDR Cable Test & Length Measurement】Cable tester is eaily to test cable’s pair status, length, attenuation reflectivity, impedance, skew, and other parameters, max 180meters(590fts). Also, you can measure opens of network cables, max measurement length up to 3000 meters. To length test, pls choose the correct cable type for more accurate results. Accuracy: Cable length x 3% ± 1m. Support Creating test report.
【Battery & Service】4 inch IPS touch screen, 800*480 resolution. Built-in PD power detection, NCV detection and FTP function. The emitter and receiver both built-in rechargeable battery, (max 3.7V 4000mAh lithium-ion.)Powerful battery life and you don't need to replace the batteries. Of cause,We will do our best to provide the best service we can, so you don't need to worry about anything.
【DMM/OPM/VFL】Multifunciton cable tester built-in digital multi-meter, optical power meter and visual fault location. Intelligent digital multimeter, auto-ranging voltage/ resistance/ continuity measurement with isolation protection. Optical power meter--It is used for signal power test and insertion loss test of various equipment and photoelectric components. VFL--the position of optical fiber fault point can be easily and accurately determined.
【POE++ Detect/Network Tools】Rj45 POE Tester supports IEEE802.3BT/AT/AF and non-standard protocol detection. Displays power supply voltage, power supply pins, and pin polarity. Furthermore, network tester built-in 1000M network port, A bunch of network tools, such as IP discovery, IP address scan, PING test, LLDP/CDP detection, Port flashing, PPPOE dial-up.
【TDR & Lever Meter】Only the LT-600T model has both TDR and Level Meter functions. Professional TDR cable break-point and short-circuit testing, the maximum measurement length up to 1200 meters(3937fts). Level Meter-- detect the coaxial camera peak level, sync level, and burst level of video signals.
【RJ45 TDR Cable Test & Length Measurement】Cable tester is eaily to test cable’s pair status, length, attenuation reflectivity, impedance, skew, and other parameters, max 180meters(590fts). Also, you can measure opens of network cables, max measurement length up to 3000 meters. To length test, pls choose the correct cable type for more accurate results. Accuracy: Cable length x 3% ± 1m. Support Creating test report.
【Battery & Service】4 inch IPS touch screen, 800*480 resolution. Built-in PD power detection, NCV detection and FTP function. The emitter and receiver both built-in rechargeable battery, (max 3.7V 4000mAh lithium-ion.)Powerful battery life and you don't need to replace the batteries. Of cause,We will do our best to provide the best service we can, so you don't need to worry about anything.