10g VCI Desiccant Vapor Phase Corrosion Inhibitor Special anti-rust, moisture-proof for containers, moisture-absorbing bags (100,white)

Product Type: It is a new type of product that combines moisture absorption and rust prevention, replacing traditional desiccants.
Moisture Absorption Performance: It has more than twice the moisture absorption performance of existing silica gel and is economical.
Environmental Friendliness: It is an environmentally friendly product composed of natural minerals and decomposable substances.
Rust Prevention Effect: It has a remarkable rust prevention effect on the metal surface, including hard-to-reach areas.
Wide Applicability: It is suitable for ferrous or non-ferrous metals, regardless of the packaging location, and causes no damage to plastics and rubbers.

VCI Vapor Phase Corrosion Inhibitor Desiccant, made from natural minerals and VCI components, is based on new technical materials. It can absorb moisture and prevent rust simultaneously, replacing traditional desiccants like silica gel and montmorillonite. Suitable for rust prevention and drying packaging of ferrous or non-ferrous metal products and materials. II. Technical Parameters Packaging Specification: 10g State: Granular Color: Grayish white, dark brown PH value: Appx. 6 - 7 Specific gravity: 0.3 - 0.45g/cc Thermal safety: <400C Storage method: Store in a sealed container in an indoor environment below 40 degrees Celsius, avoiding direct sunlight. After use, pay attention to sealing the remaining product for storage. III. Product Features It is an environmentally friendly product composed of natural minerals and chemically decomposable substances. It has more than twice the moisture absorption performance of existing silica gel, and also has a rust prevention function, making it economical and practical. It is suitable for the packaging of ferrous or non-ferrous metals, not limited by the packaging location, and has no damage to products such as plastics and rubbers. It has a remarkable rust prevention effect on the metal surface (including corners or crevices that other rust inhibitors cannot penetrate). IV. Scope of Application It is suitable for the rust prevention requirements during the transportation, storage or export packaging of various ferrous or non-ferrous metals. V. Application Method The normal usage amount is 150 - 250g/CBM. However, the usage amount needs to be adjusted according to the actual packaging environment. (1/3 - 1/2 of the silica gel usage amount)