【FNRSI Upgraded 2C53T with 2 P6100 Probe】 3In1 Oscilloscope/Multimeter/DDS Signal Generator 50MHz Bandwidth 250MS Sampling Rate 20000 Count RMS for Voltage, Current, Capacitor, Resistor, Diode
FNRSI 업그레이드 2C53T 2 P6100 프로브 포함 3In1 오실로스코프/멀티미터/DDS 신호 발생기 50MHz 대역폭 250MS 샘플링 속도 20000 카운트 RMS 전압 전류 커패시터 저항 다이오드 측정용
| 상품번호 | B0DKFCJYM4 |
| 상태 | New |
| 브랜드 | WESTOBiG |
| 판매자 | OULANGSAI-US |
| 출고국 | 미국 (US) |
아마존 판매가
$93.99
약 138,541원
구매대행 예상 비용은 로그인 후 확인하실 수 있습니다.
상품 특징
【LATEST VERSION OF FNIRSI FAMILY】Among all the combined 3in1 oscilloscopes of FNIRSI family, the 2C53T is the newest and most advanced version. It has upgraded from 2C23t and has not only improved its bandwith from 10Mhz to 50Mhz, but also improved the sampling rate from 50MS/s to 250MS/s.
【DUAL CHANNEL OSCILLOSCOPE MODE】50 MHz bandwidth, 250 MSa/s sampling rate, 1 Kpts record depth, automatic measurement function, vertical sensitivity 10mV/div-10V/div. The FNIRSI 2C53T supports peak voltage measurements up to ±400V and also supports waveform image storage and export.
【4.5-Digit 19999 COUNTS DIGITAL MULTIMETER MODE】The multimeter mode is good enough for professionals. It offers 4.5 digits with 19999 counts true RMS, supporting AC/DC voltage and current measurements, as well as capacitance, resistance, diode, and continuity measurements. AC Voltage: 0-750 V, DC Voltage: 0-999.9 V, DC/AC Current: 0-9.999 A, Resistance: 0-19.99 MΩ, Capacitance: 0-99.99 mF.
【DDS SIGNAL GENERATOR MODE】 The built-in DDS function signal generator can output 13 types of function signals, with a maximum output frequency of 50KHz and a step size of 1Hz. The output frequency, amplitude, and duty cycle are adjustable. It supports advanced functions such as XY mode, cursor measurement, persistence measurement, mathematical operations, etc., making it easy to capture abnormal signals.
【EXQUISITE DESIGN WITH LARGE CAPACITY BATTERY】The 2C53T adopts FPGA+MCU+ADC hardware architecture, built-in high-voltage protection module, adopts 2.8 inch LCD display, built-in 3000mAh battery. It can be used for 6 hours after fully charged.
【DUAL CHANNEL OSCILLOSCOPE MODE】50 MHz bandwidth, 250 MSa/s sampling rate, 1 Kpts record depth, automatic measurement function, vertical sensitivity 10mV/div-10V/div. The FNIRSI 2C53T supports peak voltage measurements up to ±400V and also supports waveform image storage and export.
【4.5-Digit 19999 COUNTS DIGITAL MULTIMETER MODE】The multimeter mode is good enough for professionals. It offers 4.5 digits with 19999 counts true RMS, supporting AC/DC voltage and current measurements, as well as capacitance, resistance, diode, and continuity measurements. AC Voltage: 0-750 V, DC Voltage: 0-999.9 V, DC/AC Current: 0-9.999 A, Resistance: 0-19.99 MΩ, Capacitance: 0-99.99 mF.
【DDS SIGNAL GENERATOR MODE】 The built-in DDS function signal generator can output 13 types of function signals, with a maximum output frequency of 50KHz and a step size of 1Hz. The output frequency, amplitude, and duty cycle are adjustable. It supports advanced functions such as XY mode, cursor measurement, persistence measurement, mathematical operations, etc., making it easy to capture abnormal signals.
【EXQUISITE DESIGN WITH LARGE CAPACITY BATTERY】The 2C53T adopts FPGA+MCU+ADC hardware architecture, built-in high-voltage protection module, adopts 2.8 inch LCD display, built-in 3000mAh battery. It can be used for 6 hours after fully charged.