XT Hot Tub Heater Split Nut Union & Tailpiece 2" Adaptor Set of 2
XT 온수 욕조 히터 스플릿 너트 유니온 및 테일피스 2" 어댑터 2개 세트
| 상품번호 | B0DJ357YNQ |
| 상태 | New |
| 브랜드 | XT |
| 판매자 | ganatty |
| 출고국 | 미국 (US) |
아마존 판매가
$33.99
약 50,101원
구매대행 예상 비용은 로그인 후 확인하실 수 있습니다.
상품 특징
Hot tub kit includes 2-inch heater split nut and 2-inch slide X 2 thread heater union kit with washers
Hot tub split nut Measures approximately 3.3" outside and mounts to existing pump union using 2 screws. Split nut has an inside dimension of approximately 2.32", mounts to the old pump union retaining flange and screws to the pump threads with a washer between the union and the pump.
Pump union split nut 2 inch Compatibility - Spa Heater Accessory Nut 2" Heater Split Nut for balboa (actual size 3" for 2" heater assembly), also replaces Gecko, Coleman, HydroQuip, Spa Builders, Correctech, Spanet, does not apply to Coleman Saluspa and LX series heaters.
2” split union for hot tub pump If your pump union nuts are cracked or broken, use a split nut to reconnect the water lines without having to cut the plumbing.
HOT TUB SPLIT NUT INSTALLATION- To install this split nut union you must remove the old damaged pump union flange nut. This nut can be cut off with a hacksaw blade or some pliers if the nut is split enough. When cutting off the nut, be careful not to cut the pump fitting gluing body.
Hot tub split nut Measures approximately 3.3" outside and mounts to existing pump union using 2 screws. Split nut has an inside dimension of approximately 2.32", mounts to the old pump union retaining flange and screws to the pump threads with a washer between the union and the pump.
Pump union split nut 2 inch Compatibility - Spa Heater Accessory Nut 2" Heater Split Nut for balboa (actual size 3" for 2" heater assembly), also replaces Gecko, Coleman, HydroQuip, Spa Builders, Correctech, Spanet, does not apply to Coleman Saluspa and LX series heaters.
2” split union for hot tub pump If your pump union nuts are cracked or broken, use a split nut to reconnect the water lines without having to cut the plumbing.
HOT TUB SPLIT NUT INSTALLATION- To install this split nut union you must remove the old damaged pump union flange nut. This nut can be cut off with a hacksaw blade or some pliers if the nut is split enough. When cutting off the nut, be careful not to cut the pump fitting gluing body.