Synchronous Brake Lever Black/Chrome for Double Bicycle Brake Cables with Cantilever & Caliper for DBI Bicycle Brake Cables

【Size】: Length: 160mm, height 90mm. Longer lever for easy braking with three fingers
【Material】: Aluminium alloy. Weight: 150g. The solid material guarantees a durable and solid brake lever. Rubber on the levers for a more comfortable experience when using the brakes.
【Easy to install】：Flexible removable snaps make it unnecessary to remove the handlebar cover from the ends of the bike's handlebars. It can be easily installed with just an H4 hexagonal screwdriver.
【Appearance】：Exterior: the black and chrome colour scheme is striking and handsome, with a small removable baffle designed to cover the eyelets (the baffle has to be removed for installation).
【Function】：The synchronised brake handle allows two brake lines to be linked at the same time. Allows you to have an extra brake cable to stop the bike motor. There are also parking catches designed to keep the brakes on by simply pulling on the brake lever and pressing the button. Handy for stopping on a variety of surfaces.

WEERAS synchronised brake levers are suitable for DIY bikes, modified bikes. Allows the brakes to be synchronised with other accessories. Meets the different needs of different cycling enthusiasts. The main function is to stop the bike motor and the brakes in sync. This requires an extra linking cable and our brake levers can meet this condition Secondly, when you have special needs for use. It is also perfectly possible to have both front and rear brake lines mounted on one brake lever. Of course I don't recommend this for novices without guidance, changing habits is not an easy task. When you don't need to ride, you can use the parking catch, which simply pulls on the brake lever and presses down to hold it in place, making it easier to park the brakes and avoid accidents. We have flexible removable handlebar catches that can be fitted directly to the handlebar without removing other accessories. To attach the brake cable you need to remove the small stopper on top and then snap it back on afterwards. This clip is mainly for decorative purposes and will not affect the function of the brake lever even if it is accidentally lost. It is usually recommended to mount it on the left side of the handlebar. This makes it easier to use with the parking clip facing upwards. Packaging: 1 x Bicycle Synchronised Brake Lever Weight: 150g Colour: black + chrome Handlebar diameter: 22.2mm