Nilight 2PCS 3.9 Inch Front Rear Side Marker Lights 3 LED Amber Clearance Indicator Lamp Waterproof Sealed Surface Mounted for 12V Truck Trailer Camper RV
Nilight 2PCS 3.9인치 전방 후방 사이드 마커 조명 3개 LED 앰버 클리어런스 표시등 방수 밀폐 표면 장착 12V 트럭 트레일러 캠퍼 RV용
| 상품번호 | B07V7F1RQX |
| 상태 | New |
| 브랜드 | Nilight |
| 판매자 | Amazon.com |
| 출고국 | 미국 (US) |
아마존 판매가
$8.99
약 13,251원
구매대행 예상 비용은 로그인 후 확인하실 수 있습니다.
상품 특징
Featured Functions: Used as led marker light in front, rear side roof top or led clearance light indicator light on any 12V pickups truck trailers SUV RV van caravan camper boat lorry bus etc.
Upgraded LEDs: Use 3 quality Piranha LED, featuring better heat dissipation, wider lighting angel, higher light intensity, and longer lifetime, make the light super durable and outputs excellent amber light. Lighting amperage: 30mA per light.
Awesome Reflector Design: The marker light employs a micro-reflex faceted reflector design, increasing the light output and adding on an exquisite appearance. Light size: 4"x1.33"x1.22", check fitness carefully before purchase.
Highly sealed: Lens and housing are sonically welded as a whole unit, inside leds are also surface-sealed. Be ready for all weather abuse
Simple Installation: Hardwire connection. Black wire for ground, red wire for positive. Just fix the black ABS base with the 2 flat head screws provided, and then snap the light into the base. To run through the back wire lead, you can either drill a center hole, or use some washers when fixing the base, so you can get space to run the wire lead without drilling center hole.
Upgraded LEDs: Use 3 quality Piranha LED, featuring better heat dissipation, wider lighting angel, higher light intensity, and longer lifetime, make the light super durable and outputs excellent amber light. Lighting amperage: 30mA per light.
Awesome Reflector Design: The marker light employs a micro-reflex faceted reflector design, increasing the light output and adding on an exquisite appearance. Light size: 4"x1.33"x1.22", check fitness carefully before purchase.
Highly sealed: Lens and housing are sonically welded as a whole unit, inside leds are also surface-sealed. Be ready for all weather abuse
Simple Installation: Hardwire connection. Black wire for ground, red wire for positive. Just fix the black ABS base with the 2 flat head screws provided, and then snap the light into the base. To run through the back wire lead, you can either drill a center hole, or use some washers when fixing the base, so you can get space to run the wire lead without drilling center hole.