Malco TS1 TurboShear Sheet Metal Cutting Drill Attachment – 20 Gauge Galvanized Steel, Straight & Left Cut | Blind Cuts from 1/2" Hole | Replaceable Hardened Jaws | Fits Cordless & Corded Drills
말코 TS1 터보셔 시트 금속 절단 드릴 부착 - 20 게이지 아연 도금 강철, 직선 및 왼쪽 절단 | 1/2" 구멍에서 블라인드 절단 | 교체 가능한 경화 죠 | 무선 및 유선 드릴에 적합
| 상품번호 | B0000AQK7C |
| 상태 | New |
| 브랜드 | Malco |
| 판매자 | Amazon.com |
| 출고국 | 미국 (US) |
아마존 판매가
$61.43
약 90,548원
구매대행 예상 비용은 로그인 후 확인하실 수 있습니다.
상품 특징
TURN YOUR DRILL INTO A POWER SHEAR IN SECONDS: The Malco TS1 TurboShear inserts directly into the chuck of any 12-volt or larger cordless or corded drill running at 1200 rpm, instantly converting a tool you already own into a capable power shear. No dedicated shear required. No extra battery system. Just chuck it in and cut.
20 GAUGE GALVANIZED STEEL CAPACITY - FERROUS & NON-FERROUS MATERIALS: Cuts straight and to the left through heavy 20-gauge (1.02 mm) galvanized steel and 18-gauge (1.22 mm) mild steel. Handles a wide range of materials including sheet metal, metal roofing panels, vinyl, steel mesh, ductwork, furnace jackets, equipment enclosures, and automotive body panels.
NAVIGATES TIGHT CURVES, SQUARES & BLIND CUTS WITH A 1/2" STARTER HOLE: The TS1's offset shear head maneuvers through tight curved patterns and sharp square cuts that snips and angle grinders can't follow cleanly. Blind cuts require only a 1/2-inch starting hole, making interior cutouts for registers, boxes, and panels fast and precise.
OFFSET DESIGN KEEPS HANDS CLEAR OF THE CUT LINE: The TurboShear's offset head positions your drill, and your hands, safely away from the cutting surface throughout the cut. Dual long-life ball bearings deliver smooth, consistent operation run after run, and the adjustable jaw clearance (via set screw) lets you fine-tune for optimum cut quality on thick or thin material.
REPLACEABLE HARDENED JAWS FOR LONG-TERM VALUE: When the cutting jaws eventually wear, simply replace them; no need to buy a new tool. The TS1's long-wearing hardened jaw inserts are available separately, making this a durable, field-serviceable addition to any HVAC, roofing, or sheet metal tool kit. Lightweight at just 1 lb. with a compact aluminum cast shear head.
20 GAUGE GALVANIZED STEEL CAPACITY - FERROUS & NON-FERROUS MATERIALS: Cuts straight and to the left through heavy 20-gauge (1.02 mm) galvanized steel and 18-gauge (1.22 mm) mild steel. Handles a wide range of materials including sheet metal, metal roofing panels, vinyl, steel mesh, ductwork, furnace jackets, equipment enclosures, and automotive body panels.
NAVIGATES TIGHT CURVES, SQUARES & BLIND CUTS WITH A 1/2" STARTER HOLE: The TS1's offset shear head maneuvers through tight curved patterns and sharp square cuts that snips and angle grinders can't follow cleanly. Blind cuts require only a 1/2-inch starting hole, making interior cutouts for registers, boxes, and panels fast and precise.
OFFSET DESIGN KEEPS HANDS CLEAR OF THE CUT LINE: The TurboShear's offset head positions your drill, and your hands, safely away from the cutting surface throughout the cut. Dual long-life ball bearings deliver smooth, consistent operation run after run, and the adjustable jaw clearance (via set screw) lets you fine-tune for optimum cut quality on thick or thin material.
REPLACEABLE HARDENED JAWS FOR LONG-TERM VALUE: When the cutting jaws eventually wear, simply replace them; no need to buy a new tool. The TS1's long-wearing hardened jaw inserts are available separately, making this a durable, field-serviceable addition to any HVAC, roofing, or sheet metal tool kit. Lightweight at just 1 lb. with a compact aluminum cast shear head.